Repair Services
Flat-price repairs are purchasable right now. Free-evaluation services get a firm quote before any work — and you pay nothing if the unit can't be repaired.
HMI & Touchscreen Repair
HMI / Touchscreens overview →Allen-Bradley
$499PanelView Plus 6 Repair
Dead screen, unresponsive touch, or boot loop on a discontinued PanelView Plus 6? Flat-price repair with your application preserved — no replacement exists.
3–5 business days in lab · Buy online now →
Allen-Bradley
$649PanelView Plus 6 12"/15" Repair
The large-format PVP6 terminals cost the most to replace — and repair the best. Flat $649 for 12.1" and 15" models.
3–5 business days in lab · Buy online now →
Allen-Bradley
$649PanelView Plus 7 Repair
Factory-channel PanelView Plus 7 repairs are quoted at $2,700–$4,000. Ours is a flat $649 — same bonded-glass repair, 24-month warranty.
3–5 business days in lab · Buy online now →
Allen-Bradley
$749PanelView Plus 7 12"/15" Repair
Large-format PanelView Plus 7 repair at a flat $749 — against factory-channel quotes that approach the cost of a new terminal.
3–5 business days in lab · Buy online now →
Allen-Bradley
$399PanelView 800 Repair
Touch, backlight, and power repair for the PanelView 800 line — flat $399 against a $2,000+ replacement.
3–5 business days in lab · Buy online now →
Allen-Bradley
from $449PanelView Standard / 550 / 1000 Repair
The legacy PanelView Standard line has been unbuyable for years — we keep them alive. From $449, priced firm after a free evaluation.
3–5 business days in lab · Buy online now →
Siemens
$499Siemens Comfort Panel Repair
The classic Comfort Panel failure is a power-supply that quits — a clean bench repair. Flat $499 with your WinCC project preserved.
3–5 business days in lab · Buy online now →
Siemens
$349Siemens Basic / TP177 / OP177 Repair
KTP Basic panels and the huge installed base of TP177/OP177/TP277 — repaired at a flat $349.
3–5 business days in lab · Buy online now →
Siemens
$549Siemens MP277 / MP377 Repair
Obsolete Multi Panels with scarce replacements — repaired at a flat $549 with your project intact.
3–5 business days in lab · Buy online now →
Pro-face
$449Pro-face HMI Repair
Pro-face touchscreens run machines for decades — until the backlight or digitizer quits. Flat $449 repair, project preserved.
3–5 business days in lab · Buy online now →
Mitsubishi Electric
$449Mitsubishi GOT Repair
GOT1000 support ends in 2027 and replacements mean rework — repair keeps your exact unit running. Flat $449.
3–5 business days in lab · Buy online now →
Omron
$449Omron HMI Repair
Omron NS and NT touchscreens fail the same three ways — touch, backlight, power. Flat $449 covers all three.
3–5 business days in lab · Buy online now →
Servo Drive & Amplifier Repair
Servo Drives overview →FANUC
Free evaluationFANUC Servo Amplifier Repair
Alarm 8, 12, or a dead amp on a FANUC machine? Free bench evaluation, firm quote before any work — most repairs land between $650 and $1,500.
3–5 business days in lab · Free evaluation →
FANUC
Free evaluationFANUC Spindle Amplifier Repair
Spindle alarms stop the whole machine. Free evaluation and a firm quote — typical spindle amplifier repairs run $750–$1,800.
3–5 business days in lab · Free evaluation →
FANUC
Free evaluationFANUC Power Supply (PSM) Repair
When the PSM faults, every axis stops. Free evaluation; typical repairs $500–$1,200.
3–5 business days in lab · Free evaluation →
Mitsubishi Electric
Free evaluationMitsubishi Servo Amplifier Repair
MR-J2S amps run half the CNC world and fail the same way — a blown IPM. Free evaluation; typical repairs $450–$950.
3–5 business days in lab · Free evaluation →
Yaskawa
Free evaluationYaskawa Servo Repair
Sigma-series servopacks from legacy SGD to Sigma-5 — free evaluation, typical repairs $400–$900.
3–5 business days in lab · Free evaluation →
Allen-Bradley
Free evaluationAllen-Bradley Servo Drive Repair
Ultra 3000 and Ultra-series drives repaired with free evaluation — typical $500–$1,100. Kinetix accepted for honest evaluation.
3–5 business days in lab · Free evaluation →
Indramat / Bosch Rexroth
Free evaluationIndramat / Rexroth Drive Repair
Indramat drives outlived their OEM support decades ago. Free evaluation, typical repairs $600–$1,200.
3–5 business days in lab · Free evaluation →
Siemens
Free evaluationSIMODRIVE 611 Repair
SIMODRIVE 611 axis modules and control cards repaired — free evaluation, typical $500–$1,400. Large infeed modules honestly declined.
3–5 business days in lab · Free evaluation →
VFD & AC Drive Repair
VFDs / AC Drives overview →Allen-Bradley
Free evaluationPowerFlex VFD Repair
PowerFlex drives up to 25 HP — free evaluation, typical repairs $350–$900 against four-figure replacements.
3–5 business days in lab · Free evaluation →
Multi-brand
Free evaluationVFD Repair (ABB, Yaskawa, Danfoss & More)
Most major-brand VFDs up to 25 HP — free evaluation, typical repairs $300–$900.
3–5 business days in lab · Free evaluation →
PLC Module Repair
PLC Modules overview →CNC Electronics Repair
CNC Electronics overview →FANUC
Free evaluationFANUC Board Repair (A16B / A20B)
A16B / A20B boards from FANUC controls, power units, and I/O — free evaluation, typical repairs $300–$800.
3–5 business days in lab · Free evaluation →
Multi-brand
Free evaluationCNC Monitor & Display Repair
Dark, shrunken, or dead CNC displays — including CRT-to-LCD conversions that end the problem for good. Free evaluation, typical $350–$750.
3–5 business days in lab · Free evaluation →
Industrial Power Supply Repair
Power Supplies overview →Don't see your unit?
The catalog shows our highest-volume repairs — we service far more. Send the part number for a free technician review and we'll confirm before you ship anything.
Machine down? Let's get it back up.
Start a repair online in two minutes, or send us the part number for a free technician review.
The Fixed-or-Free Guarantee: if we can't repair it, you don't pay for the repair.
Call (817) 799-7332 · 📱 Text us a photo of your unit · Email repairs@controlboardlab.com